Single Multi Purpose Tarp Gripper.
This single multi purpose reinforced nylon Tarp Griper can be used with tent poles to secure tarps, to replace a broken eyelet or to prevent an eyelet from tearing out.
The Tarp Gripper is great to pull tarps taught to stop flapping, or water pooling.
A flapping awning can be very irritating and noisy.
The Caravan Anti Flap Kit comes with 4 awning anti flap clips made from our Tarp Grippers and Bungee Cords. These are ideal for securing an awning, to lessen the amount of flap, and significantly reduce the irritating noise.
The Anti Flap Kit can also be used to fasten the awning valance, and stop it from flapping.
Rain Saver Gutter is an ingenious UV stabilised polycarbonate clip that turns your existing awning valance into a gutter! The kit contains everything you need to attach your hose and start collecting rainwater from your awning.
Includes 10 Gutter Clips, Leaf Guard, Snap on Hose fitting & ball Bungee’s to attach bucket.
Suitable for caravans, RV’s and motorhomes! All you need is an 180mm or 18cm drop on your awning valance. Scalloped valances also work well too with a minimum length of 18cm or greater.
All Outback Tracks screw in pegs come with a 19mm hex head.
This 19mm Socket and Drill Adaptor will work on all the Outback Tracks screw in pegs, and it will fit the caravan stabiliser legs.
Securely anchor an awning leg vertically when detached from the side of a Caravan/Motorhome.
Position the awning leg vertically, and then slip the Awning Anchor plate over the bar on the foot of the awning leg, & drill in the two Ground Dog screw in pegs, with wing collars. Use the Ground Dog screw in tent pegs with the hook collar to add tie downs for extra security if required.
The benefit of a vertical awning leg is that it gives a clear walkway around the caravan, and there is no need to duck under diagonal awning legs. A vertical awning leg also gives a better view to appreciate the surrounding area.
Made from a strong and durable rubber compound, the Safety Spring has been developed as a safer and strong alternative to the dangerous metal camping spring.
The Safety Spring is perfect for where a bit of “give” is required. The figure 8 design of the Safety Spring allows you to attach a High Viz Tie Down Strap on one loop, and hook the second loop onto the Hook Collar, of the Ground Dog screw in peg.
The Ground Grabba screw in sand pegs come in a pack of 2 and they are ideal for car awnings on the beach, and camping in sandy terrain.
The wide flutes are able to hold securely in sandy conditions.
The Ground Puppy screw in pegs are designed to hold ground mats securely while caravan and camping.
The Ground Puppy screw in peg is a 120mm stainless steel screw-in peg, that fits perfectly into 10-12mm eyelets on ground sheets.
The Ground Puppy screw in peg comes with a uniquely designed paw shaped orange cap, that helps to prevent stubbing toes. This cap was designed as a paw to encourage kids to join in while setting up and packing down camp.
Order a 10 pack of Ground Puppy® screw in pegs and get a FREE Canvas Zip Bag, valued at $18.50.
The Wing Collar has been designed to work in conjunction with the Awning Anchor Plate.
The Wing Collar can be used as a locking nut when the ground is too hard. Screw the peg in as far as possible and wind the Wing Collar to ground level to secure.
The Hook Collar has been designed to easily attach to the Safety Spring, and the Hook Collar can be used as a locking nut when the ground is too hard. Screw the peg in as far as possible and wind the hook collar to ground level to secure.
Incorporated into the bottom of the Hook Collar is a 19mm socket shape, which can be used as a hand tool if required.
Ground Dog™ screw in pegs are equipped with an orange Hook Collar for added versatility. When encountering tough ground conditions where the peg can only be screwed in halfway, the Hook Collar serves as a makeshift wing nut. Begin by screwing the Ground Dog™ screw in peg as far as possible, then utilise the collar to wind it down to ground level.
Crafted from stainless steel, the 250mm Ground Dog™ screw in pegs feature an aggressive thread and a tapered shaft. This design ensures suitability across various ground types, from hard ground to sandy, grass covered soil.
Versatile in application, Ground Dog™ screw in pegs are perfect for securing caravan awnings, tents, market gazebos, and any setting demanding robust anchoring solutions.
Order a 10 pack of Ground Dog™ screw in pegs and get a FREE Canvas Zip Bag (valued at $18.50) and a 19mm Socket and Drill Adaptor (valued at $12.95).
