How an Anti Flap Kit Can Save Your Camping Trip
Are you tired of the constant flapping noise of your awning ruining your peaceful camping experience? Look no further than the
Caravan Awning Anti Flap Kit.
An effective way to reduce the noise is to use the Awning Anti Flap Kit, which is designed to secure an awning, to lessen the amount of flap, and significantly reduce the irritating noise.
What is the Anti Flap Kit?
The Caravan Awning Anti Flap Kit includes 4 Multi-purpose Tarp Grippers, and 4 Bungee cords. The Bungee cords are looped and have a stopper on the end; and the multipurpose Tarp Gripper has corrugated edges to hold the awning firmly, a tightening mechanism with a wing nut to lock and hold the awning in place, and an easy thread & hook system.
How to Use the Kit
The Awning Anti Flap Kit is simple and easy to use.
- Unwind wing nut to open the mouth of the gripper
- Position the Gripper on either side of the awning material
- Tighten wing nut on top to secure gripper in place
- From underneath thread bungee cord through the hole on the Gripper
- Loop the bungee cord over the the awning arm
- Secure bungee cord on hook of tarp gripper.
Reduce Flapping Valance
If it’s the awning valance that’s causing the flapping noise, the Anti Flap Kit can solve that problem too. Simply secure each end of the awning with a tarp gripper and bungee cord, and the problem is solved. If you need to see how to do this pop over to the Outback Tracks website and check out the video. Simple yet very effective.
The Awning Anti Flap Kit is not only ideal for use on caravan awnings but can also be used on gazebos to reduce flapping noise, and the Tarp Gripper holds the panels firmly so that water does not pool on top.
Don’t Leave Home Without It
If you’re planning a camping trip, make sure to bring the Anti Flap Kit with you. You never know when the wind will pick up and cause flapping noise.
The Anti Flap Kit can save your camping trip and provide you with a peaceful experience.